Coastal · concept 01Coastal Watch
A full-length shoreline, lighthouse and single warm beam shaped around the rear quarter and wheel arch.
Original graphics for life less ordinary
Original and one-off campervan graphics, designed around your vehicle—not squeezed onto it.
The difference is in the fit
Every design starts with the correct vehicle outline. We consider doors, handles, panel breaks and proportions before a single piece of vinyl is cut.
How we design for your vehicle ↗New Transporter designs
Our first new Volkswagen Transporter concepts are composed directly around the bodywork—not dropped into a generic rectangle.
These are preview designs while the final cutter artwork and generation-specific fit files are prepared.
Coastal · concept 01A full-length shoreline, lighthouse and single warm beam shaped around the rear quarter and wheel arch.
Terrain · concept 02Layered peaks and flowing contour bands balanced across both wheel arches without becoming a stock mountain stripe.
Botanical · concept 03Windswept grasses, fern and swallows that rise from the rear quarter and travel naturally along the lower bodyline.
Ready-to-order ranges
Every range is available for compact campers, pop-tops, mid-size vans, high-roofs and motorhomes. Prices shown are for a single-side kit.
Launch rangeLighthouse and coastal linework with a single warm beam.
All van sizesLayered peaks and contour lines, cut in two colours.
Mid & high-roofPine trunks, bracken and one quiet fox silhouette.
Long bodyNautical contours crossed by one confident tide line.
Compact & pop-topAn angular road, distant ridges and small cairn marks.
Mid & high-roofConnected star lines, horizon arcs and a clean north point.
Motorhome rangeCow parsley, grasses and swallows drawn as one flowing edge.
New releaseA low moon, dark pines and a long horizon for lighter paint colours.
Two-colour optionA fast, architectural side stripe with one sharp colour accent.
All body lengthsA sweeping flock that follows the bodyline rather than fighting it.
Cut to your panelTopographic lines that move with the van, available mirrored as a pair.
Vehicle-specific artwork
Choose a model below to preload the vehicle finder. If your conversion is unusual, send one square-on side photo and we’ll confirm the panel layout before anything is cut.
Smaller graphics balanced around short panels and sliding doors.
Window lines, roof profiles and camper conversions all accounted for.
Longer artwork shaped for SWB and LWB bodies, on either side.
Large-format layouts with sensible sections for home fitting.
Clear prices before we cut
Choose one side, a mirrored pair or a smaller panel kit. Your exact price is confirmed after the vehicle fit check—before artwork goes into production.
Simple cut-vinyl details for windows, rear doors and smaller panels.
See quick cuts ↗Matched pairs shaped for the rear side panels or split rear doors.
See panel graphics ↗One of our original ranges resized and rebalanced for your exact model.
Choose a range ↗Original artwork, vehicle mock-up and proof revisions agreed before cutting.
Request a quote ↗Prices shown are starting prices for standard colours and common vehicle layouts. Size, number of colours, mirrored sides and unusually complex panels can change the final quote.

One range. Every camper shape.
The artwork is not stretched from one generic template. We rebalance it around your windows, doors, handles and wheelbase, then send you the proof before cutting.

Smaller graphics. Ready to ship.
Clean, affordable details for customers who do not want a full side graphic.

The material matters
Avery Easy Apply has microscopic air-release channels beneath the surface. You can position carefully, work bubbles to the edge and get a cleaner result without professional fitting experience.
Delivered ready to fit
Large designs arrive as manageable sections with the information you need to place them accurately. Add a fitting kit if you do not already own the basics.
Weeded cut vinyl with application tape already applied.
Clear order and alignment marks for multi-part graphics.
Your approved layout kept with the fitting instructions.
Surface prep, positioning, pressure and finishing explained.
Squeegee, cleaning materials and low-tack positioning tape.
Before you order
Two ways to make it yours
Pick the artwork, colour and side. We adapt the proportions and interruptions to your vehicle, then send the proof.
Tell us the place, memory, subject or style that matters. We build the artwork around your van from the beginning.
Prepared properly
Manageable sections, labelled in fitting order.
Spacing stays exactly as the design intended.
Preparation, positioning and finishing in plain English.
Your vehicle and layout confirmed before production.
The colour edit
The one-off service
Tell us what matters to you. We’ll create the artwork, shape it around your van and refine the proof with you before it reaches the cutter.
Start a custom design →Worth knowing
Still unsure? Send a photo of your van and we’ll point you in the right direction.
We confirm the make, model, generation and wheelbase before production. For unusual conversions, we ask for a clear side photograph and one or two measurements.
Yes. Any compatible range can be prepared for either side or supplied as a mirrored pair, with colour choices selected to work against your paintwork.
Yes. We use Easy Apply air-release vinyl and split larger artwork into manageable, labelled sections. Care and patience matter more than previous experience.
Apply to clean, dry, sound paint in calm conditions. Remove wax, polish and road film first, and avoid fitting to hot panels or in rain.
It is intended for sound, properly cured automotive paint. Existing repairs, lifting lacquer, rust or damage should be checked before application.
Yes. Send a square-on photo showing windows, rails, vents, handles and sockets. We use it alongside the vehicle outline when preparing your proof.
Yes. Most designs are available as a single-side kit, an opposite-side version or a mirrored pair. The product price starts with one side unless stated otherwise.
You send the idea and vehicle details. We develop the artwork, show it positioned on your van and refine it with you before cutting.
Choose “Other” in the finder and send a side photograph. We can usually identify the body and tell you what measurements are needed.
Start something
No polished brief needed. Tell us what you know and we’ll help with the rest.
hello@campergraphicsdirect.co.uk